WIRE DRAWN SCRATCH AND NON-METALLIC DRAWN BRUSHES

All of the following brushes are recommended for use in the aerospace and electronic industries.  Wire drawn or non-metallic drawn for strength and extra holding power of fill material.  Extraordinary for cleaning inside of aircraft tanks, small welds, O-ring molds, generators, and starters.  Also for cleaning parts after welding and soldering.  Excellent for sheet metal shop work.  They can be used with most solvents without damage.

Items 111-ND, 222-ND, AND 333-ND have delrin handles with non-metallic drawn nylon fill for delicate surfaces and gentle cleaning applications.

Items 111-AL-SS, 222-AL-SS, and 333-AL-SS are made with aluminum anodized handles.  Ideal for use in the clean room.  Wire drawn stainless steel fill reduces the potential for chemical contamination.


Wire Drawn Brushes
Non-Metallic Drawn Brushes
111-AL-HH, 111-AL-SS, 111-ND, 111-SD, & 111-W-SS
The following brushes have 1x11 rows, 1/8"x6 1/2" aluminum handle, 1 3/8" brush part, and a 7/16" trim.  The brush numbers and fill types are as follows:
  • 111-AL-HH Horsehair
  • 111-AL-SS Stainless Steel

The following brushes have 1x11 rows, 3/8"x6 1/2" delrin handle, 1 3/8" brush part, and a 7/16" trim.  The brush numbers and fill types are as follows:

  • 111-ND Nylon
  • 111-SD Stainless Steel

 

  • 111-W-SS Stainless Steel 1x11 rows, 7/16"x7 3/4" wood handle, 1 1/2" brush part, and a 7/16" trim

 


The following brushes have 2x7 rows, 1-7/16" brush part, 5/16"x7-3/4" wood handle, and a 7/16" trim.  The brush numbers and fill types are as follows:

  • 214-B Brass
  • 214-N Nylon
  • 214-SS Stainless Steel

214-B, 214-N, & 214-SS
222-AL-HH, 222-AL-SS, 222-ND, & 222-SD

The following brushes have 2x11 rows, 1 3/8" brush part, 3/8"x 6 1/2" aluminum handles, and a 7/16" trim.  The brush numbers and fill types are as follows:

  • 222-AL-HH Horsehair
  • 222-AL-SS Stainless Steel

The following brushes have 2x11 rows, 1 3/8" brush part, 3/8"x6 1/2" delrin handle, and a 7/16" trim.  The brush numbers and fill types are as follows:

  • 222-ND Nylon
  • 222-SD Stainless Steel

The following brushes have 3x7 rows, 1 7/16" brush part, 7/16"x7 3/4" wood handle, and a 7/16" trim.  The brush numbers and fill types are as follows:

  • 315-AL Aluminum
  • 315-B Brass
  • 315-N Nylon
  • 315-SS Stainless Steel
  • 315-HH Horsehair

315-AL, 315-B, 315-N, 315-SS, & 315-HH
333-AL-HH, 333-AL-SS, 333-ND, & 333-SS-D

The following brushes have 3x11 rows, 1 3/8" brush part, 7/16"x6 1/2" aluminum handle, and a 7/16" trim.  The brush numbers and fill types are as follows:

  • 333-AL-HH Horsehair
  • 333-AL-SS Stainless Steel

The following brushes have 3x11 rows, 1 3/8" brush part, 7/16"x6 1/2" delrin handle, and a 7/16" trim.  The brush numbers and fill types are as follows:

  • 333-ND Nylon
  • 333-SS-D Stainless Steel

The following brush has 3x7 rows, 1 7/16" brush part, 7/16"x6 1/2" wood handle bent at 60 degrees, and a 7/16" trim.  The brush number and fill type is as follows:

  • 360-SS-HT Stainless Steel

360-SS-HT