Spiral brushes can be used in drill presses, portable tools, lathes and as hand tools. They are made in a wide range of sizes to provide access to areas that may be hard to reach, such as blind spots. Also used in deburring, cleaning drilled holes and internal threads; cleaning and finishing internal diameters of tubes; carbon removal; cleaning and deburring internal keyways and grooves.
Safety Notice: Always wear proper fitting safety equipment: eye and ear protection, gloves, and safety shoes. Observe MSFS and make sure all machine guards are in place.
FLUE BRUSHES DOUBLE SPIRAL
Flue Brushes are made in a double spiral construction and with or without a pipe nipple.
Add B for Brass, CS for Carbon Steel, N for Nylon, and SS for Stainless Steel next to part number for fill type.
For pipe nipples add P1/8 for 1/8” nipple or P1/4 for ¼” pipe nipple to part number after fill type.We suggest using a 1/8” pipe nipple for ½” through ¾” diameters and ¼” pipe nipple for 7/8” through 3” diameters.
Flue Brushes Double Spiral
Brush Number
Diameter
Brush Part
Overall Length
Brass Fill Size
Carbon Steel Fill Size
Nylon Fill Size
Stainless Steel Fill Size
3000
½”
4”
7”
.006”
.006”
.010”
.006”
3001
5/8”
4”
7”
.008”
.008”
.012”
.008”
3002
¾”
4”
7”
.008”
.008”
.014”
.008”
3003
7/8”
4”
7”
.008”
.008”
.014”
.008”
3004
1”
4”
7”
.010”
.010”
.014”
.010”
3005
1-1/4”
4”
7”
.012”
.012”
.018”
.012”
3006
1-1/2”
4”
7”
.012”
.012”
.022”
.012”
3007
2”
4”
7”
.012”
.012”
.022”
.012”
3008
2-1/2”
4”
7”
.012”
.012”
.022”
.012”
3009
3”
4”
7”
.016”
.014”
.028”
.014”
Condenser Tube Brushes are made in a double spiral and a single spiral construction and with or without a pipe nipple.
Add B for Brass, CS for Carbon Steel, N for Nylon, and SS for Stainless Steel next to part number for fill type.
We suggest using a 1/8” pipe nipple for ½” through ¾” diameters and ¼” and larger pipe nipples for 7/8” through 1-1/2” diameters.For pipe nipples add the following to part number after fill type:
P1/8 for 1/8” nipple
P1/4 for ¼” pipe nipple
P1/4-28 for 1/4”-28 flow through nipple
P5/16-24 for 5/16”-24 flow through nipple
P3/8-24 for 3/8”-24 flow through nipple
Condenser Tube Brushes Double Spiral
Brush Number
Diameter
Brush Part
Overall Length
Brass Fill Size
Carbon Steel Fill Size
Nylon Fill Size
Stainless Steel Fill Size
3500
½”
2-1/2”
5”
.006”
.006”
.010”
.006”
3501
5/8”
2-1/2”
5”
.008”
.008”
.010”
.006”
3502
¾”
2-1/2”
5”
.008”
.008”
.012”
.008”
3503
7/8”
2-1/2”
5”
.008”
.008”
.012”
.008”
3504
1”
2-1/2”
5”
.010”
.010”
.012”
.010”
3505
1-1/4”
2-1/2”
5”
.010”
.010”
.014”
.010”
3506
1-1/2”
2-1/2”
5”
.012”
.012”
.018”
.012”
Condenser Tube Brushes Single Spiral
Brush Number
Diameter
Brush Part
Overall Length
Brass Fill Size
Carbon Steel Fill Size
Stainless Steel Fill Size
3600
½”
2-1/2”
5”
.006”
.006”
.006”
3601
¾”
2-1/2”
5”
.008”
.008”
.008”
3602
1”
2-1/2”
5”
.010”
.008”
.010”
3603
1-1/2”
2-1/2”
5”
.010”
.010”
.010”
CONDENSER TUBE BRUSHES DOUBLE & SINGLE SPIRAL
TWISTED HANDLE SCRATCH OR SCRUB BRUSHES
Twisted Handle Scratch or Scrub Brushes with a bent brush head.
Brush Number
Fill Material
Fill Size
Trim Length
Handle Material
Handle Length
302-B
Brass
.006”
5/8”
steel
7”
302-N
Nylon
.018”
5/8”
steel
7”
302-SS
Stainless Steel
.006”
5/8”
steel
7”
Valve Guide Brushes may be used as a hand tool or the ring handle may be cut off for power use.
Add B for Brass, CS for Carbon Steel, N for Nylon, HH for horsehair, and SS for Stainless Steel, and T for Tampico next to part number.
Valve Guide Brushes
Brush Number
Diameter
Brush Part
Overall Length
VG316
3/16”
2-1/2”
13”
VG14
¼”
2-1/2”
13”
VG516
5/16”
2-1/2”
13”
VG1132
11/32”
2-1/2”
13”
VG38
3/8”
2-1/2”
13”
VG716
7/16”
2-1/2”
13”
VG12
½”
2-1/2”
13”
VG916
9/16”
2-1/2”
13”
VG58
5/8”
2-1/2”
13”
VG34
¾”
2-1/2”
13”
VG78
7/8”
2-1/2”
13”
VG1
1”
2-1/2”
13”
VG114
1-1/4”
2-1/2”
13”
VG112
1-1/2”
2-1/2”
13”
VG134
1-3/4”
2-1/2”
13”
VG2
2”
2-1/2”
13”
VALVE GUIDES
POWER TUBE & TUBE BRUSHES
Power Tube Brushes in a single or double spiral construction. Tube Brushes from 1/4" to 12" diameter. Made to order: order by diameter, brush part, overall length, and fill type. Standard fill types are Brass, Carbon Steel, Hoghair, Horsehair, Nylon, Stainless Steel, and Tampico.
Our Micro Spiral Brushes are made to order from 1/16" to 1/8" diameter with a 1" brush part and a 4" overall length. Standard fill types are Brass, Nylon, and Stainless Steel.
Butterfly Type Brushes are made with Stainless Steel fill.
Butterfly Type Brushes
Brush Number
Diameter
Fill Size
Brush Part
Stem Diameter
Overall Length
B143
1/4”
.003”
9/16”
3/32”
2-1/8”
B14
B38
¼”
3/8”
.005”
9/16”
3/32”
2-1/8”
B12
½”
.005”
9/16”
1/8”
2-1/8”
B58
B34
B1
B114
5/8”
¾”
1”
1-1/4”
.005”
5/8”
1/8”
2-1/4”
MICRO SPIRALS
BUTTERFLY TYPE BRUSHES
Pistol Brushes are made with phosphor bronze fill and a 8/32” zinc plated steel coupling.
Pistol Brushes
Brush Number
Caliber
Brush Part
Overall Length
3800
3801
3802
3803
3804
3805
3806
3807
22
25
27
30
35
38
45
50
1-3/32”
2-1/8”
Rifle Brushes are made with phosphor bronze fill and a 8/32” zinc plated steel coupling
Rifle Brushes
Brush Number
Caliber
Brush Part
Overall Length
3820
3821
3822
3823
3824
3825
3826
3827
22
25
27
30
35
38
45
50
2-1/4”
3-9/32”
Shotgun brushes are made with phosphor bronze fill and a 5/16-27 aluminum coupling.
Shotgun Brushes
Brush Number
Caliber
Brush Part
Overall Length
3840
3841
3842
3843
3844
10
12
16
20
410
1-5/8”
2-7/8”
Abrasive Nylon Spiral Brushes for cleaning and deburring internal holes.They can be used manually or on power tools.They will not alter the surface or diameter due to the side wiping action that is produced when used on power tools.
